UTStarcom UT-300R2U User Manual Download

Page: 55 / 71

Chapter 5. Tools and Miscellaneous

5.5 MISC. CONFIGURATION

To perform a standard Ping test for network connectivity, enable or disable IGMP over Ethernet, Save and

Reboot the ADSL Router, or restore to factory default settings, click the

Misc.

window button in the

Tools

directory to

view the

Miscellaneous Configuration

window.

Miscellaneous Configuration window

The Ping test functions on the WAN and LAN interfaces. Type the IP address you want to check in the space

provided and click the

Ping

button. Read the Ping test result in the space immediately below.

To enable or disable IGMP over Ethernet, use the pull-down menu in the

Connections

section.

To save the current settings to Flash and reboot the device, click the

Save & Reboot

button.

To reset the Router to its factory default settings, click the

Restore

button. You will be prompted to wait for the

reboot to complete.

Summary of Contents for UT-300R2U








































































Search results

Summary of Contents for UT-300R2U

Reviews:

Related manuals for UT-300R2U

Brands by name

Popular brands

UTStarcom UT-300R2U, User Manual

Search results

Summary of Contents for UT-300R2U

Reviews:

Related manuals for UT-300R2U

Brands by name

Popular brands