●
following command will be carried out under EXEC mode and global CONFIG mode, and
these are complex PING commands, and not only can be used to test the connection between
the switch and the destination equipment, but also carry out different functions through inputting
different configure in interaction mode.
ping
input corresponding configure according to the clew in interaction mode.
3. The Configure of TRACEROUTE Instrument
The iSpirit 3026 switch supplies with one simple and one complex TRACEROUTE command. A
serial port end and 5 TELNET ends can carry out TRACEROUTE command to test the state of
the intermediate equipment between the switch and the destination equipment.
●
following command will be carried out under TRACEROUTE mode and global CONFIG
mode, and these are simple TRACEROUTE commands, and can be used to test the state of the
intermediate equipment between the switch and the destination equipment.
traceroute <ip-address>
●
following command will be carried out under TRACEROUTE mode and global CONFIG
mode, and these are simple TRACEROUTE commands, and not only can be used to test the
state of the intermediate equipment between the switch and the destination equipment, but also
carry out different functions through inputting different configure in interaction mode.
traceroute
input corresponding configure according to the clew in interaction mode
4. The Configuration of TELNET Client End Instrument
The iSpirit 3026 switch supplies with a TELNET command, 1 serial port end or 5 TELNET end
can carry out the TELNET command to land in the destination equipment, but the TELNET client
end only can be used by a end at the same time.
Under the global CONFIG mode we can land in the destination equipment:
telnet <ip-address>
