PRI queue and the weight is from 1 to 15. Under PORT RANGE mode configure QoS
scheduling ways.
●
Following command configures QoS scheduling in the way of SP Q
：
qos schedule spq
●
Following command configures QoS scheduling in the way of RR
：
qos schedule rr
●
Following command configures QoS scheduling in the way of WRR, the weight can be
not inpu, but if you has input it, you should input all from queue 1 to queue4: qos schedule wrr
[<queue1-weight> <queue2-weight>… <queue4-weight>] for example configure the port in the
way of WRR scheduling, the weight from queue 1 to 4 seperately as 1, 3, 5, and 7: Switch# qos
schedule wrr 1 3 5 7 Switch# show schedule
12.3 Sample for QoS Configuration
Figure 12-10 Sample of QoS Configuration
Here has three 3 02 6 devices, the first is bcommandline switch with Qo S field, the second is
inner switch with Qo S field, the third is bcommandline switch with QoS field. There are three
