Manual v1.7 – Nov 2017 © Utilivista Ltd. 2017 4
2.
Introduction to the
Entranet
2.1 – Device Overview
The
Entranet
868
gateway/receiver is at the heart of our 868MHz mesh network. It collects data from
nodes such as the
EnCompass
868
and conveys it seamlessly and securely to the web via TCP/IP or 3G*.
Installed on the
Entranet
is a data and device management hub which can be accessed locally or via the
internet. Use it to manage the network and swiftly setup new devices, connect your data easily to any
other software, system or server, or see it right there on the dashboards.
*This document refers to both variants of the
Entranet
868
. The TCP/IP variant connects via Ethernet
only while the 3G variant can also connect to the internet via 3G/GPRS. Notification will be given where
information does not apply to all variants and options.
2.2 – Features Overview
2.3 – Network Overview
The C2i mesh network allows a large number of measurements to be taken over a large area and reported
via radio frequency (RF) to a single gateway/receiver – the
Entranet
868
C2i wireless data collectors
operate with the
Entranet
in one of three configurable modes. When a
device
is in
node
setting it collects data and transmits it back to the
Entranet
. When in
repeater
setting it
receives data from nodes too far from the
Entranet
and then retransmits the data, thus extending the
range of the system. (To ensure that transmission, and therefore battery usage, is efficient, the maximum
number of repeaters between a node and the
Entranet
is two). The third mode,
node/repeater
, combines
the functionality of both.
•
Superior, seamless mesh network using protocol designed for high range and
penetration in challenging environments without compromising power
consumption.
•
Connect to any software, system or server to/through CSV, Modbus,
BACnet, LonWorks, SCADA/DCS and more.
•
Powered by 24vdc PSU or 5v USB mains adapter.
•
Simple setup and clear configuration, either locally or remotely via
the device/data management hub installed onboard.
•
Data can be reviewed on the local dashboards
•
Firmware can be upgraded over-the-air.
•
Modbus TCP/IP Slave and Master via Serial connection (option)
•
Sampling and reporting fully customizable.
•
Signal strength reported.
•
Powerful system diagnostic tools.
•
IP67 rated
