Manual v1.7 – Nov 2017 © Utilivista Ltd. 2017 11
4.4.5 - Settings for Digital Inputs (applicable only to devices with digital inputs installed.)
These settings are located by opening the
Configuration
folder and then the
Onboard Inputs
folder in the
menu.
There is a page called
Generic Settings
which allows you to set the sampling interval for both digital inputs.
(The interval between any two consecutive data values, between 10 seconds and 4 hours.)
The page called
Status / Pulse
allows you to activate and set the mode for the digital inputs. The options
for mode are:
Take regular snapshots
or
Keep pulse count
. See the sub-section on
Status / Pulse
in the
Settings for
EnCompass
Inputs & Outputs
section (5.7.6, P17) below. You are also able to give a custom
label to each input.
4.5 – Diagnostics
The 6 sections below refer to pages that can be found by opening the Diagnostics folder from the menu and
clicking on the relevant section.
4.5.1
-
Error Log
•
Reports
: You will be able to see details of any problems with email or FTP operations, which may
be due to an intermittent internet connection, incorrect server details, etc.
•
Modbus
: You will be able to see details of any problems with Modbus requests, which may be due
to registers not being valid on a particular device, or failure to connect to the device. The
presence of an error message indicates that a read request was attempted.
4.5.2
-
Command Log
The
Command Log
shows all network commands processed by the wireless network receiver.
By default the page displays logs for today; Use the date option to select a different day. Each day should
at least show some commands to synchronise time clocks. If there are no commands or all commands for
a day have a status of ‘Failed’, this may indicate internal system problems, and a power cycle is
recommended.
4.5.2
-
Upgrade Log
This shows all upgrade activity for this gateway. A table shows the date and time, upgrade filename and
status of all upgrades, most recent first.
To manually initiate upgrade, if you have a file for this, see Section 4.4.1, P10. Please note that it may
take up to 2 minutes for an uploaded upgrade file to show in the Upgrade Log.
4.5.3
-
Boot Log / GSM Log
This shows all instances of the device shutting down or booting up, and for 3G devices, all instances of
the GSM connection status changing.
