Manual v1.7 – Nov 2017 © Utilivista Ltd. 2017 8
4.
Configuring your
Entranet
4.1 – Accessing the Device
Connect the
Entranet
to power via the 24v PSU or the USB adaptor.
The settings for IP networking can be changed, but the
Entranet
must first be accessed using
its default IP address: 192.168.1.130.
To add to a LAN which allows a new device with static IP address 192.168.1.130:
•
Connect the RJ45 Ethernet cable into a switch or router.
•
You may need to wait for about 2 minutes for the device to be fully booted up and available via
Ethernet cable. See the next section (4.3) for a guide to the LED indicator showing the Ethernet
port status.
To connect directly to a computer (e.g. to change the IP address to suit your LAN):
•
Ensure your computer is not connected to any other LAN, either wirelessly or through an
Ethernet cable.
•
Connect the RJ45 Ethernet cable into your computer’s Ethernet port. You may need wait for
about 2 minutes for the device to be fully booted up and available via Ethernet cable. See the next
section (4.3) for a guide to the LED indicator showing the Ethernet port status.
•
In the TCP / IP settings of the LAN connection for your computer, set the IP address manually
within the range
192.168.1.1 – 192.168.1.254
, (but DO NOT use 192.168.1.130), and the subnet
mask to
255.255.255.0
.
•
Open Internet Explorer or another browser on a computer on the network, and type into the
address bar: http://192.168.1.130.
4.2 – Logging In
You will need to log in with a username and password.
The username must be ‘admin’, ‘manager’ or ‘user’:
•
Logging in as ‘admin’ allows you to change any settings.
•
The default password for admin is: C2iAdmin
•
Logging in as ‘manager’ allows you to change configuration settings but not general settings.
•
The default password for manager is: C2iManager
•
Logging in as ‘user’ means that no changes can be made.
•
The default password for user is: C2iUser
Passwords can be changed in the
Administration
settings. Each login type allows all settings to be viewed.
CAUTION
It is strongly advised to create a unique password at the earliest opportunity.
This document, and thus the default passwords, are publicly available.
