© 2018 Utilicor Technologies Inc.
minicor-3 V1.5
7
OPERATIONAL SAFETY
The use of this equipment is subject to certain hazards which cannot be
protected against by mechanical means or product design. All operators of
this equipment must read and understand this entire manual, paying attention
to safety and operating instructions, prior to using. If there is something in this
manual you do not understand, ask your supervisor, or your dealer, to explain
it to you.
Most accidents occur because of neglect or carelessness. Keep all helpers
and bystanders fifty feet (10’) from an operating power unit and attached
equipment. Only properly trained people should operate this machine. Always
stop the power unit, set brake, before engaging
auxiliary hydraulics and leaving the cab or operators platform. Never leave
equipment unattended with the engine running.
Please remember it is important that you read and heed the safety signs on
the attachment and power unit, and the safety rules set forth. Clean or
replace all safety signs if they cannot be clearly read and understood. They
are there for your safety as well as the safety of others. The safe use of this
machine is strictly up to you, the operator.
Be sure power unit is in good condition. Read all the safety precautions and
make sure all operators are familiar with the safety rules of operation.
Working with unfamiliar equipment can lead to careless injuries. It is the
equipment owner’s responsibility, if this machine is used by any person other
than yourself, is loaned or rented, to make certain that the operator, prior to
operating:
1. Reads and understands the operator’s manuals.
2. Is instructed in safe and proper use.
Train all new personnel and review instructions frequently with existing
workers. A person who has not read and understood all operating and safety
instructions is not qualified to operate the machine. An untrained operator
exposes himself and bystanders to possible serious injury or death.
