V1
9
x
No security / accidents protection device shall be altered or removed, and it shall be
operated correctly.
x
When cleaning or repairing the machine the main switch shall be turned off.
x
Before starting the machine the following points shall be specially followed:
- The protection screen on top of the wet mortar vessel shall be firmly screwed together.
- All pump components shall be firmly screwed to the machine.
x
The operation safety shall be checked any time the machine is started. As soon as any
failure or a sign of it is detected, it shall be immediately eliminated, and if necesssary the
supervising staff shallbe informed, or in the event of failure that may threaten the safety, the
operation stopped.
x
All accidents caused by the non-observance of the regulations for security and accidents
prevention at work, or of the insurance company or by the law of the country where it is
functioning or caused by negligence, the lawmaker shall make responsible to that person
operating it or, in case it is not his/her responsibility because of the lack of training or of
basic knowledge, then to the supervising staff.
x
If needed, or at least once a year, an expert shall check the machine safety operating
conditions. An expert is that person having a training and experience in the field, as well as
sufficient knowledge about transport and mortar projection machines, and who is made
familiar with the legal regulations for safety at work, accidents prevention regulations,
instructions and generally accepted rules, so that the security conditions at work offered by
the machine can be correctly assessed.