14
1. Thermostat should be installed on an inside
wall about four feet above the floor.
2.
NeVer
install a thermostat on an outside
wall.
3. Do not install a thermostat where it will be af-
fected by:
A. Drafts
B. Hot or cold pipes
C. Sun light
D. Lighting fixtures
E. Television sets
F. A fireplace or chimney
TYPICAL INSTALLATION BURRIED TANK OIL SYSTEM
WITH 2 OR MORE UNITS
OIL LINE MUST BE BURIED OR OTHERWISE
PROTECTED FROM
DAMAGE. MINIMUM
OIL FILTER
SHUT OFF VALVE
APPROVED
FITTINGS
SUCTION
FILL
PIPE
.5" IPS OR 1/2" O.D. COPPER TUBING
OIL
JOINTS
SWING
RETURN LINE
REFER TO LOCAL
CODE
LINE
TANK
SUPPL
Y
LINE
*
APPROVED DAY TANK OR
AUX. TANK WITH BOOST PUMP
4"
3"
MANIFOLD .5"
figure #8
OIL TANK AND PIPING
THERMOSTAT INSTALLATION
4. Check thermostat operation by raising and
lowering thermostat as required to start and
stop the burner.
5. Instructions for the final adjustment of the ther-
mostat are packaged with the thermostat ( ad-
justing heating anticipator, calibration, ect.).
Summary of Contents for SFM24150W
Page 2: ......
