11
OIL LINE MUST BE BURIED OR OTHERWISE
PROTECTED FROM DAMAGE. MINIMUM
OIL FILTER
SHUT OFF VALVE
SWING JOINTS
APPROVED FITTINGS
OIL GAUGE
FILLER PIPE
VENT PIPE
.5" IPS OR 1/2" O.D. COPPER TUBING
REFER TO NATIONAL BOARD OF
FIRE UNDERWRITERS
MINIMUM
OIL TANK
TYPICAL INSTALLATION SINGLE PIPE OIL SYSTEM WITH 2 OR MORE UNITS
TEES
CLOSE
NIPPLES
VENTILATION & COMBUSTION AIR
VENTING SYSTEM INSPECTION & INSTALLATION
coMBusTion air supplied
froM inside The Building
figure #4
INSPECT CHIMNEY to make certain it is
constructed according to the latest revision of
NFPA211. Local codes may differ from this code
and should be checked. Where there is a conflict,
the local code will prevail.
This boiler must be installed into a chimney which
has a masonry or metallic chimney liner.
BOILER IS TO BE VENTED BY NATURAL
DRAFT AND SHALL NOT BE CONNECTED
INTO ANY PORTION OF A MECHANICAL
DRAFT SYSTEM OPERATING UNDER A
POSITIVE PRESSURE.
WarNiNG
MORE THAN 10'(3.1 M)
10' (3.1 M)
2' (.61 M)
HEIGHT ABOVE ANY
ROOF SURFACE WITHIN
10' (3.1 M)
HORIZONTALLY
CHIMNEY 3'
RIDGE
MIN.
(.92 M) MIN.
GAS VENT OR
TYPE L VENT 2'
(.61 M) MIN.
figure #5
Summary of Contents for SFM24150W
Page 2: ......
