Page 9/21
UTEK TECHNOLOGY (ASIA) CO., Ltd.
http://www.szutek.com
0755-27886063
b)
Serial Port Communication Settings
Serial Port Communication Settings---Port (communication settings of the serial ports)
Baudrate
Baudrate of the serial port (should be consistent in value with the baudrate of the serial device
connected )
Type of Connection
Type of the serial port (including RS232/485/422)
Data Bits
Data bits (The default is 8, and the actual value should be consistent with the device connected)
Stop Bits
Stop bits (The default is 8, and the actual value should be consistent with the device connected)
Parity
Parity bits (Including Nove, Even, Odd, Mark, and Space. The default is N, and the actual value
should be consistent with the device connected.)
Flow Control
Flow control
FIFO
First in first out (enabled for default)
Lock
Locking configuration (possible to lock the configuration of the port for the convenient repeated
setting in future days)
tXON
tXOFF
TX Empty
Del String
RX Freetime
RX idle time
RX Max Length
RX maximum length
TX Block Time
TX block time
XANY
DTR ON
DTR is a hardware based control mode of flow control, where you can decide if it is necessary to
set a data terminal ready signal for you application.
Keepalive
Keepalive time (configure the keepalive time of the ports of the terminal server, the range is
between 0-10000s, 0 for no keepalive work)
Baud Adjust
Fine adjustment of the baudrate
Advanced Setting
Extension options
Submit
Submit (to complete the setting, after configuration of the above options you need to click on the
submit button, and then click on “Reset ports”, select “port1” and click on the “Submit” button to
submit)
Apply to all ports
Apply to all ports (this option can be checked if all ports are of the same settings)
