Page 14/21
UTEK TECHNOLOGY (ASIA) CO., Ltd.
http://www.szutek.com
0755-27886063
Username
The user name to be dialed out (Enter the user name here if authentication is required by the
server end to be connected.)
Password
The password to be dialed out (Enter the password here if authentication is required by the
server end to be connected.)
CHAP Needed
CHAP is one of the PPP certified protocols. Selecting yes means that this protocol must be used
during connection; selecting no means that it is optional.
Free Time
Allowed idle time (The server will disconnect automatically if there is no data transmission in the
time period set after the connection is established. The value range of the option is between
0-10000 min. Entering 0 or nothing means automatic disconnection is disabled.)
Modem Init Cmd
The Modem initialization command (To initial the MODEM connected to this serial port, typically
“at” is used for the client end.)
Modem Dial Cmd
The Modem dialing command (What dialing mode the MODEM will use: audio or pulse. Type
“atdt” for audio dialing (which is the most case in practical applications) and “atdp” for pulse
dialing.)
Phone Number1
Dialing out number 1
Phone Number2
Dialing out number 2
Phone Number3
Dialing out number 3
Phone Number4
Dialing out number 4
CallBack To
callback
CallBack Phone
The callback telephone number.
Dynamic Dial
Dynamic dialing
PPP daemon
In this mode, each serial port of the server can be used as the dial in/out end of the PPP server, it supports applications of
remote dialing access
Communication
Mode
Operation mode
Authentication Authentication mode (Identity authentication is required when accepting the connection from the
client end. There are three options: [none], [pap] and [chap]. None represents for no
authentication.)
Peer IP Address
Peer IP address (the IP address assigned to the client end)
Local IP Address
Local IP address
Local IP Mask
Subnet mask
Allocate DNS
Allocation of DNS server (Whether or not allocate the IP address of the domain server to the
client end during the connection with the client end. Yes for request, No for not request.)
