Page 15/21
UTEK TECHNOLOGY (ASIA) CO., Ltd.
http://www.szutek.com
0755-27886063
Freetime
Allowed idle time (The server will disconnect automatically if there is no data transmission in the
time period set after the connection is established. The value range of the option is between
0-10000 min. Entering 0 or nothing means automatic disconnection is disabled.)
Modem Init Cmd
Modem initialization command
Modem Dial Cmd
Modem dialing command
CallBack Callback
status.
CallBack Phone
The callback telephone number.
CallBack Mode
Callback mode
Line printer daemon (Printer mode)
It is used to connect a printer, and to use the serial server as the printing server. Remote printing is possible through
connecting a printer on a serial or parallel port (connected to a device with large number of ports) to the server.
Communication
Mode
Operation mode
Sequeue Name
Sequence name
Begin Sequeue
Begin printing sequence (The string sent by the server to the printer to initialize the printer before
printing the main text.)
End Sequeue
End printing sequence (The string sent by the server to the printer after the printing of the main
text is finished.)
CR As
There are four parameters: [none], [cr], [lf], and [cr-lf]. [none] means that the server will not send
an “ENTER” received from a serial port to the Ethernet; [cr] means that the server will send an
“ENTER” received from a serial port to the Ethernet just as it is; [lf] means that the server will
change an “ENTER” received from a serial port to a “NEW LINE” and then send it to the
Ethernet; [cr-lf] means that the server will change an “ENTER” received from a serial port to an
“ENTER” and a “NEW LINE” and then send them to the Ethernet.
LF As
There are four parameters: [none], [cr], [lf], and [cr-lf]. [none] means that the server will not send
an “ENTER” received from a serial port to the Ethernet; [cr] means that the server will send an
“ENTER” received from a serial port to the Ethernet just as it is; [lf] means that the server will
change an “ENTER” received from a serial port to a “NEW LINE” and then send it to the
Ethernet; [cr-lf] means that the server will change an “ENTER” received from a serial port to an
“ENTER” and a “NEW LINE” and then send them to the Ethernet.
