Utax CD 1128 Page 18 Instruction Handbook Manual Download

Page: 18 / 186

Part Names and Functions

OPERATION GUIDE

1-3

Lit when the machine's

main power is on.

Used to register or recall

programs.

Ends operation (logs out)

on the Administration

screen.

Turns the machine on/off. Also used

to put it into or recover it from sleep

mode.

Cancels the printing job in progress.

Resets settings and displays the

basic screen.

Starts sending operations and processing for setting operations.

Clears entered numbers and characters.

Numeric keys.

Enter numbers and symbols.

Displays the function menu for FAX.

Used to select a menu item, move the cursor when

entering characters, change a value, etc.

Returns the Message Display to the

previous screen.

Lights or blinks when an error occurs.

Selects the chosen item or finalizes the

entered value.

Blinks while the machine is accessing the memory.

Summary of Contents for CD 1128



























































































































































































Search results

Summary of Contents for CD 1128

Reviews:

Related manuals for CD 1128

Brands by name

Popular brands

Utax CD 1128, Instruction Handbook Manual

Search results

Summary of Contents for CD 1128

Reviews:

Related manuals for CD 1128

Brands by name

Popular brands