Utax CD 1128 Instruction Handbook Manual Download Page 137

Page: 137 / 186

Setup and Registration

6-22

OPERATION GUIDE

Changing and Deleting Permit ID No.

Follow steps 1 to 7 of

Registering Permit ID No. on

page 6-21

Press the

key to selec the Permit ID No. to

be changed or deleted.

To change Permit ID No., go to step 3, and to delete
Permit ID No., go to step 8.

Press [Menu] (the

Right Select

key).

Press the

key to select [Detail/Edit].

Press the

key.

Use the numeric keys to reenter a Permit ID
number (0000 to 9999).

NOTE:

Press the

Clear

key to display the previous

number.

Press the

key. Proceed to step 12.

Press [Menu] (the

Right Select

key).

Press the

key to select [Delete].

Press the

key.

Press [Yes] (the

Left Select

key). This deletes the

Permit ID number.

To change and delete other Permit ID numbers,
repeat step 2 to 11.

Permit ID List:

*********************

0007

[ Menu

]

Menu:

*********************

Delete

Add FAX ID

Permit ID:

(0000 - 9999)

****0004*

Menu:

Detail/Edit

*********************

Add FAX ID

Delete.
Are you sure?

0004

[ Yes ]

[ No ]

Summary of Contents for CD 1128



























































































































































































Search results

Summary of Contents for CD 1128

Reviews:

Brands by name

Popular brands

Utax CD 1128, Instruction Handbook Manual

Search results

Summary of Contents for CD 1128

Reviews:

Brands by name

Popular brands