Utax CD 1128 Instruction Handbook Manual Download

Page: 135 / 186

Setup and Registration

6-20

OPERATION GUIDE

Press the

key to select [Detail/Edit].

Press the

key.

Use the numeric keys to reenter the Reject FAX
number. Up to 32 digits can be entered.

NOTE:

Press the

Address Recall/Pause

key to insert

a pause (-) between two digits.
Press the

key to move the cursor.

To correct the number, press the

Clear

key to delete the

digits one by one before reentering the number. To
delete the number entirely, press the

Reset

key.

Press the

key. Proceed to step 12.

Press [Menu] (the

Right Select

key).

Press the

key to select [Delete].

Press the

key.

Press [Yes] (the

Left Select

key). This deletes the

Permit FAX number.

To change and delete other Reject FAX numbers,
repeat steps 2 to 11.

Menu:

*********************

Delete

Add FAX Number

FAX No. Entry:

0667640001

Menu:

Detail/Edit

*********************

Add FAX Number

Delete.
Are you sure?

0667640001

[ Yes ]

[ No ]

Summary of Contents for CD 1128



























































































































































































Search results

Summary of Contents for CD 1128

Reviews:

Related manuals for CD 1128

Brands by name

Popular brands

Utax CD 1128, Instruction Handbook Manual

Search results

Summary of Contents for CD 1128

Reviews:

Related manuals for CD 1128

Brands by name

Popular brands