The Dance Floor
Panel’s
Outside Edging
The edge of a dance floor panel is only ¾ of an inch high and is rounded. The edging of the floor can be
finished without beveled edging as shown in figure 1-10 or with beveled edging as shown in figure 1-11.
Figure 1-10
Dance Floor Surface
Outside Edge
¾ inch
Figure 1-11
Optional
Aluminum Beveled Edging
NOTE:
All new floors come with brand new never been used plugs and sockets. This means they may
tend to be stiff and fit tight at first. To fix this it is recommended to apply a little marine grease on all the
connections.
The ARCH Portable Lighted Dance Floor System
Copyright USA Dance Floor, LLC
