88
DS1083-046A
This page can be used to edit the name of a block by using the alphanumeric
keyboard and the
C
, and buttons in the shortcut menu. Press the
OK
button to con
fi
rm the change.
This page appears if an attempt is made to enter an empty name for a block. The
system will automatically go back to the block modify page after approximately
three seconds
This page appears if an attempt to assign a name which was previously used
for another block is made.
The system will automatically go back to the block modify page after
approximately three seconds.
This parameter speci
fi
es the offset to assign to the apartment numbers of the
block to differentiate them from the numbers of different blocks (default: 0).
In each block (or column) the apartments have a physical address comprised in
the [0,127] range and therefore must be called by entering a number comprised
in the range. In some installations, it is useful to call apartments belonging to
different blocks by using numbers comprised in different ranges.
Therefore, by specifying an offset other than zero for a given block, the
sequential
numbering to be used to all the apartments of that block will be in
the [0, 127] range.
For example, if an offset of 300 is speci
fi
ed for block (or column) 05, by keying
346 the calling module will call physical code 05 046, i.e. the apartment with
physical address 46 in column 05.
The offset that can be assigned to the numbering of the apartments
of the riser must be between 0 and 9872.
Summary of Contents for ELEKTA STEEL
Page 91: ...91 DS1083 046A...
