59
DS1083-046A
8.3.1.
Select CONFIGURATION on the main menu. The menu shown to the side
appears where the user can press the
buttons to select the
NO
item.
8.3.2.
Then select the type of PRIMARY module with the
buttons and press
OK
to con
fi
rm.
8.3.3.
The page shown here by the side will appear if PRIMARY calling module type
is selected.
Select YES for multiriser systems or NO otherwise and press
OK
to con
fi
rm
the selection.
8.3.4.
Set the identi
fi
cation code (ID) of the primary module on the keypad and press
OK
to con
fi
rm the selection.
Permitted values: 0 ÷ 3.
An error will appear when exiting con
fi
guration mode and returning
the device to normal operating mode if a previously used ID is set.
Summary of Contents for ELEKTA STEEL
Page 91: ...91 DS1083 046A...
