55
DS1083-046A
7.2. PARAMETER
CONFIGURATION
Program the calling module after having installed it by con
fi
guring the following parameters.
7.2.1. PARAMETERS TABLE
Parameter
Description
Possible values Default
settings
Language
Language used on the display
Č
eština,
Deutsch,
English, English
UK, Español,
Français,
Italiano, Magyar,
,
Nederlands,
Polski,
Português,
Slovenš
čina
.
ITALIANO
Module type
Select primary or secondary module.
All system users may be called from the primary
module. A secondary module may only call the users
of the riser to which it belongs. Users who receive the
call can identify the source of the call by the tone.
Two secondary calling stations may be present in a
riser and must have a different address (secondary
0 or 1).
PRIMARY
SECONDARY
PRIMARY
Multirise
This indicates whether the system consists of several
risers or not.
The operation will only appear if “PRIMARY” module
type was selected.
YES, NO
NO
Module ID
Identi
fi
cation code of the calling module = door
station number.
No two primary stations can have the same ID.
Two secondary stations with the same ID but with
different number may coexist (set 0 if there is only
one secondary module on the riser, set 0 and 1 if
there are two).
The ID of the secondary door unit must coincide with
the riser ID.
For primary
module: 0 ÷ 3
For secondary
module: 0 ÷ 31.
0
Code type
Setting up the type of user code.
Physical code: 5 digits, consisting of riser number
(00 ÷ 31) + apartment number (000 ÷ 127).
Logical code: up to four digits long, permitted
values: 1 ÷ 9999
•
•
Physical,
Logical
Physical
Busy time
Time after which the current call may be interrupted
by other calls.
The same busy time must be programmed
for all calling modules in the system.
30 s
Stoppable
This setting determines whether auto-on without
audio or an intercom call can be interrupted by a call
from the door unit.
The same “Stoppable” setting must be
programmed for all calling modules in the
system.
YES, NO
NO
Summary of Contents for ELEKTA STEEL
Page 91: ...91 DS1083 046A...
