86
DS1083-046A
Set the identi
fi
cation code (ID) of the primary module on the keypad and press
OK
.
to con
fi
rm the selection.
Admissible values: 0÷3
An error will appear when exiting con
fi
guration mode and returning
the device to normal operating mode if a previously used ID is set.
The next items on the menu are the same ones found in points 8.3.9 to 8.3.22.
14.2. CONFIGURATION OF SECONDARY CALLING MODULE
Select CONFIGURATION on the main menu. The menu shown to the side
appears where the user can press the
, to select
YES
.
Then select the type of SECONDARY module with the
buttons and press
OK
to con
fi
rm.
Set the column number of the secondary module on the keypad and press OK
to con
fi
rm the selection.
Permitted values: 0 ÷ 31
No speci
fi
c error is indicated if an incorrect column number is set but
no user can be called.
Summary of Contents for ELEKTA STEEL
Page 91: ...91 DS1083 046A...
