37
DS1168-013C
Once the code is entered, it must be confirmed with control
(while the one with the icon
deletes the
character on the left of the cursor).
The default password for the device is 1937 and can be modified by the user by accessing the configuration
web pages via the terminal.
If the password you entered is incorrect, a screen like the one shown below will appear on the display:
B.3. Once the password has been confirmed, the device is unlocked and ready to operate as a WiFi access point.
B.4. The following screen appears on the display while the keypad module, and any other connected modules,
start flashing:
B.5. When the device is set up as a WiFi access point, the following screen appears on the display:
Caution: Controls
and
can be used to:
•
Exit the
advanced configuration of the display module and restart the device
•
Return the DISPLAY MODULE
web page parameters to default values (for more details see
the
RESETTING THE CALL MODULE
chapter).
The device automatically switches off the WiFi access point during this step (waiting for connection) after
10 minutes of inactivity.
B.6. At this point, using the terminal find display module Ref. 1168/1 in the available WiFi networks. Its name
is: URMET_1168_1_XXXXXXXXXXXX
Numbers
XXXXXXXXXXXX indicate the MAC ADDRESS of the device shown on the back of the
display module.
It is not possible to connect to the WiFi access point with several terminals at the same time, as only
one terminal at a time is recognised and connected.
