Selecting Auto Dimming
If auto dimming is turned on, then the bottom item in the list on this screen shows,
Auto Dimming ON
. If auto
dimming is turned off then the bottom item in the list on this screen shows,
Auto Dimming OFF
.
If you desire to change the auto dimming state of your thermostat LCD display then use the arrow keys to
move the highlight bar to
Auto Dimming
to toggle this option.
Press the key below the
OK
key label in the smart-key label at the bottom right of the display to select this
option. If you decide to cancel the operation then press the key below the
Cancel
key label in the smart-key
label at the bottom left of the display.
Viewing THZ-100 Thermostat Information
The
Information
selection in the
Options
screen is used to display various THZ-100 thermostat parameters to
indicate how the thermostat was setup as well as some wireless signal strength information. This information
is not used in normal operation.
Setting the Date and Time
If your THZ-100 has lost wireless communication with the MRX Advanced Network System Controller main
unit, the
Options
list includes an option to set the date and time. If you desire to set the date and/or time then
use the arrow keys to move the highlight bar to
Date & Time
.
Press the key below the
OK
key label in the smart-key label at the bottom right of the display to change your
settings. If you decide to cancel the operation then press the key below the
Go Back
key label in the smart-key
label at the bottom left of the display.
After pressing
OK
, the screen updates to give you a list of the date and time entries that you can change. The
left column displays Month, Day, Year, Hour, and Minute. The right column displays the current value. Use the
arrow keys to move the highlight bar to the value you wish to change.
In the smart-key label at the bottom right of the display, select this option. If you decide to cancel the
operation then press the key below the
Cancel
key label in the smart-key label at the bottom left of the display.
Press the key below the
OK
key label in the smart-key label at the bottom right of the display to change your
settings. If you decide to cancel the operation then press the key below the
Go Back
key label in the smart-key
label at the bottom left of the display.
The new screen display shows the value that you have selected to change. Use the Up and Down arrow keys to
the right of the display to select your new value. When you are satisfied with your new selection, press the key
below the
Set <parameter>
key label.
190
Summary of Contents for THZ-100
Page 5: ...Dual Stage Furnace and Dual Stage A C Single Stage Heat Pump with Reversing Valve O 184 ...
Page 6: ...Single Stage Heat Pump with Reversing Valve B Dual Stage Heat Pump with Reversing Valve O 185 ...
Page 7: ...Dual Stage Heat Pump with Reversing Valve B Boiler and A C with Separate Transformers 186 ...
