Installing your THZ-100 Thermostat
Adding an optional wired sensor can be a benefit if the thermostat location is not the optimal location for
temperature measurement, or if temperature averaging is desired.
• A wired sensor can be connected to the S+ and S- terminals on the back of the unit
• This can be added to any of the wiring options detailed in the next pages
For optimum performance, mount the THZ-100 thermostat and/or remote sensor
• In an open living area where there is good air circulation
• On an inside wall
• Away from outside doors or windows
• At a height about 5 feet from the floor
Avoid installing the THZ-100 thermostat and/or remote sensor
• In direct sunlight
• Above radiators or air vents
• Near fans or portable heating units
• Near lamps or other incandescent lighting
• Near other heat generating electric appliances such as televisions, audio video equipment,
refrigerators, freezers, ovens, cooktops, etc.
Other precautions when installing the THZ-100 thermostat and/or remote sensor
• Make sure the cutout for the HVAC wiring is no larger than needed to make proper connections to the
thermostat
• If there is a large air gap in the cutout for the HVAC wiring, insulate around the wire and close off the
air gap
• Make sure the air vents in the THZ-100 thermostat and/or remote sensor are clear of dirt, dust, or
any construction material.
182
Summary of Contents for THZ-100
Page 5: ...Dual Stage Furnace and Dual Stage A C Single Stage Heat Pump with Reversing Valve O 184 ...
Page 6: ...Single Stage Heat Pump with Reversing Valve B Dual Stage Heat Pump with Reversing Valve O 185 ...
Page 7: ...Dual Stage Heat Pump with Reversing Valve B Boiler and A C with Separate Transformers 186 ...
