Step 3.6 Egg Box Sub Assembly
Round-Top Walk-In Coop
Copyright ® All Rights Reserved
Urban Coop Company
TM
Find your inner farmer
TM
Œ
Using Green T20 screws, attach the two F13 Outer
Eave Boards as illustrated with inside edges dying into F12
Mid Panel, top edges flush with F10 top beveled edge and
ends overhanging by ~1”. Top surface of eaves, top surface
of Outer F6 Dividers and top edge of F2 Egg Box Sides
should be flush.
Center F14 Eave Board with magnets onto front edge of
F12 Mid Panel and secure using Green T20 screws with
edges overhanging F6 Inner Dividers equally on both sides.
Top surface of eaves and top surface of Inner F6 Dividers
should be flush.
Ž
Position F15 Roof Panels as indicated forcing top edge up
tightly against Egg Box Side Run Wall, above drip flashing
and lipped inside edged jammed against the feeder area.
Using H10 Roof Screws affix F15 to Egg Box Sub Assembly
attaching through holes into tops of F6 Outer Divider, edge of
F7 Inner Divider, top edge of F2 Sides and F13 Eave Boards.
Repeat for other side.
F16 magneically attaches the Feeder Box Area to keep
area dry.
Egg Box Side View
24"
Metal Lip To Inside Edge
Metal Lip To Inside
F13
F13
F14
F16
F15
F15
F12
F10
Œ
Œ
Ž
Ž
Summary of Contents for Round-Top Chicken Coop Walk-In
