URAL Motorcycles 2014 Gear up, Owner'S Manual

Page: 28 / 99

28
1. When starting the engine after the motorcycle has been parked for an extended period of
time, or after the fuel tank and/or carburetors have been completely emptied of gasoline (e.g.
due to running out of fuel, evaporation, or installation of replacement parts), set the valve to
the “PRI” position. This will allow gasoline to fill the float chambers of the carburetors and
prepare the engine for starting.
2. Start the engine
3. After the engine starts, set the valve to the “ON” position and keep the valve in this position
for regular use of the motorcycle. (When set to “ON”, the valve is automatically activated
when the engine starts and stops, opening and shutting off the supply of fuel to the
carburetors)
4. After using up the main volume of fuel (engines starts stalling due to lack of fuel), set the
valve to the “RES” position and continue driving. After refueling, remember to set the valve
back to “ON” to avoid running out of fuel completely.
IMPORTANT: W hen parking the motorcycle for extended periods of time, the valve should
remain in the “ON” position.
WARNING: N ever leave the motorcycle with the engine turned off and the valve set to “PRI”
as this may result in a serious damage to the engine and will void your warranty.
AUTOMATIC PETCOCK