uPunch HN1000 Product Manual Download

Page: 36 / 38

QUESTIONS?

Watch our helpful videos at

upunch.com/resources

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT OPEN THE TIME CLOCK. NO USER

SERVICEABLE PARTS ARE INSIDE. REPAIRS SHOULD BE

COMPLETED BY AUTHORIZED SERVICE PERSONNEL ONLY.

WARNING

RISK OF FIRE OR ELECTRIC SHOCK – DO NOT OPEN

4. Do not expose to water or any liquid.

5. Do not place objects into the time clock.

6. For best operation, plug the time clock into its own electrical outlet.

7. Do not operate the time clock with a damaged cord or plug.

8. If an extension cord is used, the marked electrical rating of the extension cord should

be at least as great as the electrical rating of the time clock.

9. Plug the time clock into a surge protector or uninterruptible power supply (UPS).

If a surge protector is not used and there is a power surge, your warranty may be
voided.

Summary of Contents for HN1000







































Search results

Summary of Contents for HN1000

Reviews:

Related manuals for HN1000

Brands by name

Popular brands

uPunch HN1000, Product Manual

Search results

Summary of Contents for HN1000

Reviews:

Related manuals for HN1000

Brands by name

Popular brands