QUESTIONS?
Watch our helpful videos at
upunch.com/resources
Setting the Duration of the Alarm (code 00)
Under the HN3 menu, when the code “00” appears, set the duration of the alarm time (in
seconds). Use the
+
and
–
buttons to make your selection, then press
Enter
to confirm the
setting.
Setting the Ringing Time from Group 01 to Group 12 (codes 01–12)
Set up to 12 different times, or groups, for the alarm/bell to ring during the work week.
Each group is numbered 01–12. Use desired number of alarms. For example, only two
alarms are required if setting alarms for beginning and end of a lunch break.
1. When the code “01” appears, use the + and – buttons to select the hour, then press
Enter to confirm the setting.
After the hour is set, you will set the minute for the alarm.
2. Use the + and – buttons to select the minute, then press Enter to confirm the setting.
After the time is set, you will set the days of the week for the alarm.
3. Use the + and – buttons to scroll through the days. A flashing triangle indicates the day
that is currently selected. The + button moves your selection from right to left and the
– button moves your selection from left to right. Press the Back button to toggle each
day on or off.
For example, if you would like to enable the alarm for weekdays only, you will disable the
Summary of Contents for HN1000
Page 1: ...HN1000 HN3000 Product Manual ...
Page 37: ...35 ...