2-2
LX13/41 Electric Work Platform
M
ACHINE
P
REPARATION
& O
PERATION
Section
2.1
2.1 I
NTRODUCTION
This manual covers the Electric model of the LX
Series Work Platforms. This machine operates on a
48 volt battery powered system.
DO NOT use a machine that is damaged or
malfunctioning. Tag and remove the unit from
service until it is repaired.
2.2 P
RE
-O
PERATION
AND
S
AFETY
I
NSPECTION
Carefully read, understand and follow all safety rules,
labels, and operating instructions, then perform the
following steps each day before use.
Perform a complete visual inspection of the entire
unit prior to operating.
1. Open panels and check hydraulic components
and hoses for damage or leaks. Check electrical
components and wiring for damage or loose con-
nections.
2. Inspect chassis, axles, hubs, and steering linkage
for damage, deformation, buckeled paint, loose or
missing hardware, and cracked welds.
3. With platform fully lowered, check the hydraulic
oil level sight gauge on the hydraulic tank . Add
ISO #46 hydraulic oil if necessary.
4. Check that fluid level in all batteries is correct
(See Battery Maintenance in Section 3).
5. Check that all guardrails are in place. Insure that
gate operates freely and latches securely.
6. Check tires for damage. Check tire pressure; 75
psi (5.2 bar) if equipped with pneumatic tires.
7. Carefully inspect the entire work platform for
damage such as cracked welds or structural
members, loose or missing parts, oil leaks, dam-
aged cables or hoses, and loose connections.
System Function Inspection
STAND CLEAR of the work platform while per-
forming the following checks.
Before operating the work platform survey the
work area for surface hazards such as holes,
drop-offs, bumps and debris.
Check in ALL directions, including above the
work platform, for obstructions and electrical
conductors.
Protect control console cable from possible
damage while performing checks.
Hour Meter
Raise
Lower
Emergency
Stop Button
Platform/
Chassis/Brake
Release
Switch
Brake
Release
Figure 2-1: Chassis Control Panel
C A U T I O N
!
!
W A R N I N G
!
!
Summary of Contents for LX31
