LX31/41 Electric Work Platform
3-23
M
AINTENANCE
Section
3.18
3.18 S
TEERING
C
YLINDER
Removal
1. Remove and cap the hoses. Mark them for refer-
ence.
2. Remove the hair pin retainers from the clevis pins
at each end of the cylinder.
3. Remove the clevis pins.
4. Remove the cylinder from the chassis.
Installation
1. Align the ends of the cylinder with the mounts on
the chassis.
2. Install the clevis pins.
3. Install the hair pin retainers into the clevis pins at
each end of the cylinder.
4. Install the hoses, noting their orientation mark-
ings from disassembly.
1. Rod Wiper
2. Rod Seal
3. Wear Ring, 2 required
4. Retaining Ring
5. Head
6. Backup Ring
7. O-ring
8. Locknut
9. O-ring
10. Rod Weldment
11. Tube Weldment
12. Piston Seal
13. Piston
14. Wear Ring
Seal Kit Number: 067633-010
Figure 3-23: Steering Cylinder Cross Section
Summary of Contents for LX31
