www.uponor-usa.com • www.uponor.ca
6
Uponor Climate Co˘ntrol™ Zoning System Installation Guide
7
Components Installation
Mounting the Base Unit Antenna
Decide if the antenna should be mounted on the back of
the base unit or on the wall.
Caution:
If the base unit is installed inside a
metal manifold cabinet, place the end or the
entire antenna outside the cabinet.
Clip the Antenna Into the Back of the Base Unit
1. Use a one-foot antenna cable.
2. Connect the RJ 9 connector into the antenna.
3. Clip the antenna into the base unit.
4. Insert the cable of the antenna into the hole of the
base unit.
�
Connect to terminals 9 and 10.
Fastening the Antenna to the Wall with Screws
1. Connect the RJ 9 connector into the antenna.
2. Using a drill bit, drill the wall.
3. Fix anchor and screw to the wall. Let the screw
protrude from the wall.
4. Fasten the antenna on the screw.
Fastening the Antenna to the Wall with Adhesive
1. Connect the RJ 9 connector into the antenna.
2. Use the double-sided adhesive strip to attach the
antenna to a smooth wall, such as glazed ceramic tiles.
10 feet
10 feet
#09
#10
