Upgrading everyday security Commpact User Manual Download Page 40 | Manualshive

Page: 40 / 56

background image

Appendix B: Web User Application

36

CommPact User Manual

The Main Page

After logging in, your system’s home page is displayed. The following diagram shows
the Main page and explains the main elements of the Web application’s interface.

Figure 6: Main Page

Menu Bar

The Menu Bar includes the Main Menu options as well as the Log Off button. The Main
Menu offers the user links to various pages in the Web Application. Use the Logoff
button on the right side of the menu to close the session.
The following options are available from the Main Menu:

•

Home – pressing the Home button allows the user to return to the
Home page at any time.

•

Set/Unset – provides access to the System Operation Area page.

•

Settings – offers various options including user code and contact
management, event log viewing and zone omit.

•

History – enables you to view the system’s event log.

•

Video – You can discuss the home automation capability with your
security service provider to determine if it is applicable to your
system.

•

Automation – You can discuss the home automation capability with
your security service provider to determine if it is applicable to your
system.

•

Help/Download – offers online explanations on how to use the Web
Application plus FAQ and customer support options.

«
...
38
39
40
41
42
...
»

Summary of Contents for Commpact

























































Reviews:

No comments

Related manuals for Commpact

JBL BAR 5.0 MULTIBEAM

Brand: Harman Pages: 25

Brand: RainSoft Pages: 16

Brand: Panasonic Pages: 16

Brand: M-system Pages: 6

Brand: Globe Pages: 4

Corro Wicking Bed

Brand: WaterUps Pages: 3

Brand: M-E Pages: 72

Brand: D.A.S. Pages: 45

Brand: RTS Pages: 6

Brand: Sygonix Pages: 120

Brand: Alpha Pages: 4

Brand: VIEWONHOME Pages: 21

Audio Everywhere

Brand: Listen Technologies Pages: 2

Brand: DS Pages: 7

Brand: Entrotec Pages: 8

Brand: E-Bench Pages: 22

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands