2.
The User Interface
6
CommPact User Manual
Setting Keys
Three setting keys are available: Full, Part, and Perimeter. These buttons set the system
using one of the three setting methods. One-key Setting is an option that is programmed
by your engineer.
Service Call Button
The Service Call button enables you to contact the monitoring service and talk to an
operator.
To initiate a service call, press the up arrow button
, then press and hold down the
Service Call button
.
Vocal Message Recording and Playback
Front Panel allows you to record a short message that may be played back later by
another user – see p. 27,
7.6. Service Menu, Message Center.
System Status LEDs
The System Status indicators provide essential information on the status of the system
such as set, unset, alarm and power failure conditions.
OK
LED Status
Meaning
Off
Both AC and Battery power are disconnected.
On Green
System Power status is OK and there is no System Trouble.
Flashing Green
Open Zone. Check that the windows and doors are closed and no
movement is detected by the detectors within the protected
area.
On Yellow
System Trouble.
