I
I N
N D
D I
I V
V I
I D
D U
U A
A L
L P
P R
R O
O G
G R
R A
A M
M
This new generation
BACKING MASTER
has available several programs that include a program called INDIVIDUAL
PROGRAM because you can program it yourself.
You can include some of the pre-programmed parts of the basic works setting as well as being able to change the
timings of individual program phases or even leaving out various program processes. This gives you the possibility of
individually making your bread or even preparing dough.
Initially for the basic setting of INDIVIDUAL PROGRAM we offer the following information
:
INDIVIDUAL PROGRAM
The program offers the following options
Select browning degreeg
yes
Acoustic signal for adding
ingredients (in the kneading
phase)
yes
Time delay
yes
Sizes I and II
no
The manufacturer’s pre-set program corresponds to the
program “Yeast cakes”. The duration of the respective
program phases can be adjusted within the limits listed
below:
Total time
in hours
3:50
Pre-heat
- heating on/off
Preset time
presetting from / to
0:22
0-30 minutes
Kneading
Preset time
presetting from / to
0:18
0-30 minutes
1st raising
Preset time
presetting from / to
0:45
0-120 minutes
(2:00 hours)
2nd raising
Preset time
presetting from / to
1:25
0-120 minutes
(2:00 hours)
3rd raising
Preset time
presetting from / to
OFF
0-120 minutes
(2:00 hours)
Baking
Preset time
presetting from / to
1:00
0-60 minutes
(1:00 hour)
Keep-warm
Preset time
presetting from / to
60
OFF or 1:00 hr
Carry out as follows:
Select
EIGENPROGRAMM
/Individual program
with the menu button.
Chose the appropriate sector with the program
sector button
PROGRAMMABSCHNITT
. The dis-
play shows the first program phase
PREHEAT
and
the preset time for this phase (0:22 min.).
You may now adjust the preset time ny pressing
the time change button
ZEITÄNDERUNG
within
the limits shown in the schedule, i.e. 30 min for
this phase. If you want to shorten the time, con-
tinue to press the key after reaching 30 min., it will
restart at 0 and you set for example 10 minutes.
The setting options are listed in the schedule on
the left side. If you want to cancel a certain pro-
gram phase, press the button
ZEITÄNDERUNG
,
until the display shows OFF.
Then confirm the adjustment by pressing the pro-
gram sector button
PROGRAMMABSCHNITT
once.
Press the program sector button
PROGRAMM-
ABSCHNITT
again to move to the next program
sector for which the programmed time will be dis-
played.
When the times in the table of the appropriate
program sector are exceeded by pressing the time
change button
ZEITÄNDERUNG
,
OFF
appears in
the display; this will cause this sector to be ignored
in the program process.
Whenever you make any changes, each program
sector, even if no changes are made, must be con-
firmed by pressing the program sector button
PROGRAMMABSCHNITT
.
After having adjusted resp. confirmed all program
phases, the display shows again the first phase
PREHEAT
.
Now leave the program setting by pressing the
START/STOP
button once. The display now
shows the total preset time for the indivdual pro-
gram.
Press the START/STOP button again to start the
program.
On the next page you will find two exampes for working with the individual program:
49
Summary of Contents for Backmeister 8650
Page 2: ......