Stand 9.8.2022
43 von 152
DE
EN
FR
NL
IT
ES
PL
Automatic
Cooling
Dehumidifying
Ventilation
Select temperature
8. You can adjust the cooling temperature between 15°C and 31°C in
increments of 1°C. Keep pressing the b and - until the desired
temperature is shown on the display. The set temperature will be displayed
for 5 seconds before the temperature shows the current room temperature.
9. Note: If you press and hold the + and - buttons for 5 seconds, you can
change the display from °C to Fahrenheit. The adjustable temperature is
then 59°F to 88°F.
Ventilation speed
10. Press the speed button (Speed) to toggle the fan speed between low and
high.
ON/OFF
11. Another press of this button will switch the appliance off.
EXPLANATION OF THE INDIVIDUAL MODES
Automatic mode
12. Once automatic mode is enabled, the sensor will automatically select
between cooling and ventilating. For room temperatures above and below
24 °C, the appliance will provide cooling and ventilation, respectively.
Cooling
13. The room air is cooled down. Once the room temperature rises above the
desired target temperature, the compressor comes on and the appliance
provides cooling. Once the room temperature drops below the target
temperature, the compressor stops and the top fan comes on.
Dehumidifying
14. The room air is dehumidified without being cooled. The settings in this
operating mode cannot be adjusted. The fan runs at low speed, while the
Summary of Contents for 86220
Page 3: ...Weitere Informationen zu unserem Sortiment erhalten Sie unter www unold de...
Page 151: ......
Page 152: ...Aus dem Hause Aus dem Hause...
