Unold 86220, Instructions For Use Manual

Page: 38 / 152

38 von 152 Stand 9.8.2022
DE
EN
FR
NL
IT
ES
PL
The exhaust and the adapter have been matched exactly with this device.
Do not replace either one with third-party products to ensure the appliance
will continue to run properly.
1. Extend the exhaust hose to the required length by pulling on both ends of
the hose.
2. Connect the exhaust hose adapter (1) with one end of the hose by plugging
in the hose and turning it lightly.
3. If necessary (e. g. when used in sliding windows), connect the mounting
plate (2) with the other end of the hose as described in step 2.
THE IDEAL LOCATION
1. Observe all information provided below as your appliance will otherwise not
run safely.
2. Never set up the appliance in places that are very hot or exposed to direct
sunlight. The appliance may otherwise become damaged or display error
messages.
3. Never set up the appliance close to television sets or radios. The image
or sound quality of these devices may otherwise be affected. Set up the
appliance with a minimum distance of 1 metre from such devices. Caution:
If you run the air conditioner from the same power strip as TV or radio sets,
you may experience noise or image distortion as well. If this happens, plug
the air conditioner into a different power socket.
4. The appliance will not be able to deliver its maximum performance unless it
is set up on a level surface.
5. Keep an adequate distance from other objects and walls. The front and the
top require at least 30 cm of clearance to other objects, while the clearance
on the rear must be 20 cm.
6. Never place any objects on the appliance to prevent the appliance from
malfunctioning.
7. Never cover up any air inlets or air outlets.
8. Make sure not to point the air flow directly at people.
INSTALLATION OF THE EXHAUST HOSE