P a g e
| 21
Steel Body, Automatic Wood Pellet Feed Hot Water Boiler Operation and Maintenance
Manual
Cooling
S2.1 Fan speed (0-3000 rpm)
S2.2 Cooling time 2 (0-20000 sec)
S2.3 Cooling temperature (0-100 °C)
S2.4 Approach to cooling temperature (0-
10 °C)
S2.5
(0)
Ash gearbox off
(1)
Ash gearbox on
Closing and Cooling Common
Parameters
S3.1 Ash gearbox feeding time (0-40 sec)
S3.2 Ash gearbox standby time (0-40 sec)
Boiler Type
V1.1 Difference temperature to cut
heating (0-5 °C)
V1.2 Fan type
(0)
With capacitor
(1)
Shaded pole
Fan Operating Values
V2.7 Fan encoder selection
(0)
With encoder
(1)
Without encoder
Cleaning Gearbox Times
V3.1 Cleaning operating time 1 (0-23
hour)
V3.2 Cleaning gearbox feeding time (0-
250 sec)
V3.3 Cleaning operating time 2 (0-23
hour)
V3.4 Cleaning gearbox feeding time (0-
250 sec)
V3.5 Number of work cleaning gearbox
(0-5)
Circulation Pump Operating Values
V4.1 Pump operating temperature (0-100
°C)
V4.2 Pump shutdown temperature (0-100
°C)
V4.3 Pump run time at temperature rise
(0-255 sec)
V4.4 Pump standby time at temperature
rise (0-255 sec)
V4.7 Shut down time at power 0 (sleep
mode) (0-20 min) – (0: cancel)
Various Settings 1
V5.1 Direct closing temperature with stop
button (0-99°C)
V5.2 Adjustable minimum boiler
temperature (40-50 °C)
V5.3 Maximum flue temperature (0-400
°C)
V5.4 Controlling start temperature of No
Fuel (0-100 °C)
V5.5 Temperature of No Fuel (0-100 °C)
V5.7 Resume time (0-20 min)
V5.8 Flue temperature at extinguishing
detection in power step (40-150) –
(150: cancel)
Various Settings 2
V6.1 Fuel level sensor error value (0-50)
V6.2 Fuel level sensor error time (0-250
sec)
V6.3 Hopper protection fuel feeding time
(0-250 sec)
V6.4 Hopper protection fuel standby time
(0-50 min)
V6.5 Hopper protection temperature (50-
90 °C)
The values F1, F2, F3, F4 and F5 displayed on the control panel refer to the wood pellet type. In the
table below, wood pellet types are given according to their lower heat values. Select the type of
thermal wood pellet that matches your fuel and press the Enter button.
F1
F2
F3
F4
F5
4,07 kW
4,42 kW
4,94 kW
5,23 kW
5,58 kW
