
1-5
Replacing Paper Rolls - - - - - - -
SX-7005
1. Roll Size:
Single Thermal Roll – 44.5 mm x diameter 83 mm
2. Removing the printer cover:
Turn the printer cover lock key counter-clockwise and gently lift the cover.
3. Removing the old paper:
Press the “Receipt feed” and “Journal feed and key to feed the remaining paper through the printer.
DO NOT force paper through the printer as this may result in damage to the printer mechanism or cause
a paper jam.
OR
Pull the paper release lever (head up lever) towards the front of ECR and pull the paper through the
printer.
4. Inserting new paper:
a) Place the new paper in the correct position on the printer's paper roll bed.
b) Make sure that the leading edge of the new paper roll is cut straight across.
c) Set the head up lever to the head down condition and insert the leading edge into the printer slot, the
paper is automatically fed into the printer.
Note:
If receipts are blank, it is likely the paper is threaded wrong side up. Thermal paper is coated on
one side only.