
2-1
REPORTS------------------------------------------------------------------------------------SECTION 2
Please be aware, X Reports are for readings and do not clear or reset any data.
Z1 or Z2 reports will clear or reset the data.
Once a Z1 or Z2 report is run it can NOT be re-printed, so make sure there is enough paper and
it has been installed properly BEFORE running ANY reports.
OVERVIEW OF REPORTS
X Reports are those that can be printed without resetting the totals. These reports can be printed as
often as needed during the business day.
Z1 Reports are those that should be Reset & Printed at the close of business each day.
Z2 Reports are those that should be Reset & Printed at the “End of Period”, immediately after the Z1
Reports have been taken.
How to Run X or Z1/P Reports
With all Team Members signed off, using the X, Z or M key, turn the key lock to the (X or Z1/P)
position.
Enter Clerk number and press the [CLERK] key
Using the [PAGE] & [SCROLL] keys press [ENTER] when REPORTING FUNCTIONS is
highlighted.
Using the [PAGE] & [SCROLL] keys press [ENTER] when the chosen report is highlighted.
With the message “TO ISSUE…” press [ENTER] to print the report.
The register will automatically sign the Team Member off.
How to Run Z2 Reports
With all Team Members signed off, using the M key, turn the key lock to the (Z2) position.
Enter Clerk number and press the [CLERK] key
Using the [PAGE] & [SCROLL] keys press [ENTER] when the chosen report is highlighted.
With the message “TO ISSUE…” press [ENTER] to print the report.
The register will automatically sign the Team Member off.