13
DO NOT TAKE or SEND PRODUCT BACK to where this product was purchased. Please contact Universal Fitness/FFA Corp.
for missing or defective parts at one of the following:
Phone 1-800-521-6233 or Fax 1-662-495-5038 or E-mail at
Mailing address: Universal Fitness/FFA Corp. - 100 Tubb Ave. West
Point MS 39773. Web sight www.universal-fitness.com
FIGURE 3
Step 8.
Step 9.
Step 10.
Step 11.
Step 12.
Step 13.
Slide two ROUND BUMPERS (52) onto one end of each GUIDE ROD (8).
FIGURE 3
Insert the GUIDE RODS (8) into the large
outside holes in the CENTER FRAME (28)
with ROUND BUMBERS (52) resting on
CENTER FRAME.
IMPORTANT: Loading the WEIGHT PLATES
(96) will require two people. One to hold the
GUIDE RODS (8) steady while the other per-
son slides the WEIGHT PLATES down the
GUIDE RODS.
With the SLOTS facing out and on the bot-
tom as shown, slide the WEIGHT PLATES
(96), one at a time, down the GUIDE RODS
(8).
Insert the SELECTION ROD (38) into the
center hole of the TOP PLATE (95) and fas-
ten at the end hole with 7/16” x 1-1/2” ALLEN
SCREW (94).
Slide TOP PLATE (95) down GUIDE RODS
(8) so that SELECTION ROD (38) slides into
the center hole of the WEIGHT PLATES (96).
Insert WEIGHT SELECTION PIN (62) through
SLOT in WEIGHT PLATE (96) and through
SELECTION ROD (38).
