manualshive.com logo in svg

Universal 75015, Owner'S Manual, Page: 24 / 36

Share
Download
Universal 75015 Owner'S Manual Download Page 24

24

DO NOT TAKE or SEND PRODUCT BACK to where this product was purchased. Please contact Universal Fitness/FFA Corp.
for missing or defective parts at one of the following: 

Phone 1-800-521-6233 or Fax 1-662-495-5038 or E-mail at

customerservice@universal-fitness.com.

 Mailing address: Universal Fitness/FFA Corp. - 100 Tubb Ave. West

Point MS  39773. Web sight  www.universal-fitness.com

FIGURE 12

Step 59.

Step 60.

Step 61.

Step 62.

Step 63.

Step 64.

Attach SINGLE PULLEY BRACKETS (35) to RIGHT VERTICAL FRAME (5) with 5/16” x 2-1/2” HEX BOLTS (84), 5/16”
WASHERS (89) and 5/6” LOCKNUTS (85).

Attach PULLEYS (42) to SINGLE PULLEY BRACKETS (35) with 3/8” x 2” HEX BOLT (80), 3/8” WASHERS (90) and
3/8” LOCKNUTS (86).

Attach a PULLEY (42) to one side of DOUBLE PULLEY BRACKET (34) with 3/8” x 2” HEX BOLT (80), 3/8” WASHERS
(90) and 3/8” LOCKNUTS (86).

Attach one end of BUTTERFLY CABLE (64) to RIGHT BUTTERFLY (26) with 5/16” x 1” HEX BOLT (81) 5/16” WASH-
ERS (89) and 5/16” LOCKNUT (85).

See DETAIL, and thread BUTTERFLY CABLE (64) over top of PULLEY (42) in SINGLE PULLEY BRACKET (35), then
under PULLEY in DOUBLE PULLEY BRACKET (34) and up through other SINGLE PULLEY BRACKET over top of
PULLEY.

Attach BUTTERFLY CABLE (64) to LEFT BUTTERFLY (27) with 5/16” x 1” HEX BOLT (81) 5/16” WASHERS (89) and
5/16” LOCKNUT (85).

Summary of Contents for 75015





































Reviews:

No comments