26
DO NOT TAKE or SEND PRODUCT BACK to where this product was purchased. Please contact Universal Fitness/FFA Corp.
for missing or defective parts at one of the following:
Phone 1-800-521-6233 or Fax 1-662-495-5038 or E-mail at
Mailing address: Universal Fitness/FFA Corp. - 100 Tubb Ave. West
Point MS 39773. Web sight www.universal-fitness.com
FIGURE 13
Step 65.
Step 66.
Step 67.
Step 68.
Step 69.
Step 70.
Step 71.
Step 72.
Step 73.
Step 74.
Step 75.
Step 76.
Step 77.
Attach a PULLEY (42) at upper hole of CONNECT FRAME (18) with 3/8” x 4-1/8” HEX BOLT (72), 3/8” WASHERS (90)
and 3/8” LOCKNUT (86).
Attach one PULLEY (42) to the PRESS COLUMN (21) with 3/8” x 7” HEX BOLT (69), 3/8” WASHERS (90) and 3/8”
LOCKNUT (86).
Attach two PULLEYS (42) to the double bracket of the PRESS COLUMN (21) and double bracket at bottom of RIGHT
VERTICAL FRAME (5) with 3/8” x 3-1/2” HEX BOLTS (74), 3/8” WASHERS (90) and 3/8” LOCKNUT (86).
Attach PULLEYS (42) to the three single brackets on the RIGHT BASE BEAM (1) with 3/8” x 2” HEX BOLTS (80), 3/
8” WASHERS (90) and 3/8” LOCKNUT (86).
Attach PULLEY (42) to other end of DOUBLE PULLEY BRACKET (34) with 3/8” x 2” HEX BOLTS (80), 3/8” WASH-
ERS (90) and 3/8” LOCKNUT (86).
Attach PULLEYS (42) to the two single brackets on the RIGHT TOP CROSS FRAME (11) with 3/8” x 2” HEX BOLTS
(80), 3/8” WASHERS (90) and 3/8” LOCKNUT (86).
Attach PULLEU (42) in slot of RIGHT TOP CROSS FRAME (11) with 3/8” x 2-1/2” HEX BOLT (79), 3/8” WASHERS
(90), 12mm BUSHINGS (92) and 3/8” LOCKNUT (86).
Attach one PULLEY (42) to DOUBLE PULLEY BRACKET (33) with 3/8” x 2” HEX BOLTS (80), 3/8” WASHERS (90)
and 3/8” LOCKNUT (86).
Insert eye end of the UPPER CABLE (65) up through slot in RIGHT TOP CROSS FRAME (11) and over PULLEY (42).
See DETAIL, and continue to route the cable as shown.
Attach the eye end of the UPPER CABLE (65) at the lower hole in the CONNECT FRAME (18) with 3/8” x 4-1/8” HEX
BOLT (72), 3/8” WASHERS (90) and 3/8” LOCKNUT (86).
Using liquid soap, slide HAND GRIPS (51) onto each end of LAT BAR (30).
Attach LAT BAR (30) to UPPER CABLE (65) with HOOK (60) or with two HOOKS and CHAIN (61).
