Universal Remote Control URC-SR3, Owner'S Manual

Page: 16 / 52

Page | 15
STEP 5: You can continue learning all other
buttons from your old remote by pressing the
next button on the URC-SR3 and repeating
this step.
Note:
The component light will blink five times
if there was an error in the learning process. In
this case, please repeat Steps 3and 4.
STEP 6:
Save your work.
After the URC-SR3
has learned all the buttons for the selected
component, press and hold the Component
button and ENTER [ENT] buttons at the same
time to save the learned functions. The
component light will blink three times to
confirm the programming.
Check your work.
Test all the buttons to make
sure they learned correctly. Repeat Steps 1-5 to
set up any other component modes.
We love to talk!
PLEASE CONTACT OUR TECHNICAL
SUPPORT CENTER.
E-MAIL: techsupport@UniversalRemote.com
Phone: 1-800-901-0800 (9:00AM - 6:00PM
EST Monday - Friday)
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
COMPONENT
BUTTONS