Universal Remote Control URC-SR3, Owner'S Manual

Page: 15 / 52

Set-up using the
Learning Method
STEP 1: Line up the URC-SR3 to the remote
control you want to “learn” from, head—to—
head as shown below. Start with the two
remotes’ infrared (IR) windows touching, or
nearly touching.
STEP 2: On the URC-SR3, press the Component
button that you want to program and the
ENTER [ENT] button at the same time. Hold
down both buttons for two seconds until the
Component button light turns on. This signals
that you are in set-up mode.
STEP 3: Press any button on the URC-SR3
that you want to teach a command to. For
example, if you want to teach the [MUTE]
button on the URC-SR3 the TV Mute command
from the other remote, first press the [MUTE]
button on the URC-SR3. The TV Component
button light will blink once indicating that
the URC-SR3 is ready to learn the command.
STEP 4: Press and hold the appropriate button
on the other remote until the component button
light on the URC-SR3 blinks twice. This indicates
the URC-SR3 has learned the command from
your other remote.
Didn’t work? Tap and release the button on
your old remote instead of pressing and
holding the button down. See other tips on
page 16.
Page | 14
COMPONENT
BUTTONS