manualshive.com logo in svg

Universal Audio Soundcraft Realtime Rack, Manual

Share
Download
Universal Audio Soundcraft Realtime Rack Manual Download Page 2

Realtime Rack Manual

Table Of Contents

2

Table Of Contents

Chapter 1: Introduction ....................................................................... 12

Welcome Soundcraft Realtime Rack! ................................................................. 12
Realtime Rack Features .................................................................................... 13

Hardware ........................................................................................................................... 13
Software ............................................................................................................................ 13

System Requirements ...................................................................................... 14
Package Contents ............................................................................................ 14
Realtime Rack System Overview ........................................................................ 15

Soundcraft Vi Series Consoles .............................................................................................. 15
Realtime Rack Hardware ..................................................................................................... 15
Realtime Rack Software Application ..................................................................................... 15
UAD Powered Plug-Ins ........................................................................................................ 16
UAD Meter & Control Panel Software Application ................................................................... 16

UAD Meter ................................................................................................................... 17
UAD Control Panels ....................................................................................................... 17

UA Online Store .................................................................................................................. 17

Documentation Overview .................................................................................. 18

Realtime Rack Manual ........................................................................................................ 18
UAD Plug-Ins Manual .......................................................................................................... 18
Direct Developer Plug-Ins .................................................................................................... 18
Soundcraft Vi Series Consoles .............................................................................................. 18
Hyperlinks .......................................................................................................................... 18
Updated Information & Software .......................................................................................... 19

Technical Support ............................................................................................ 19

Soundcraft: Support for Vi Series Consoles and Realtime Rack Hardware ................................. 19

Soundcraft Tech Support (UK)........................................................................................ 19
Soundcraft Tech support (USA) ...................................................................................... 19

Universal Audio: Support for Realtime Rack Software ............................................................. 20

UA Support Hours ......................................................................................................... 20
Telephone .................................................................................................................... 20
Online Support ............................................................................................................. 20
Realtime Rack Support Page .......................................................................................... 20

Chapter 2: Hardware ........................................................................... 21

Hardware Overview ........................................................................................... 21
Front Panel ..................................................................................................... 21

(1) HOST Indicator ............................................................................................................. 21
(2) PSU Indicators .............................................................................................................. 22

PSU Indicator notes: ..................................................................................................... 22

(3) POWER Indicator ........................................................................................................... 22
(4 & 5) MADI Indicators ...................................................................................................... 22

Tip: 

Click any section or 

page number to jump 
directly to that page.

Summary of Contents for Soundcraft Realtime Rack




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands