manualshive.com logo in svg

Universal Audio Soundcraft Realtime Rack, Manual

Share
Download
Universal Audio Soundcraft Realtime Rack Manual Download Page 143

Realtime Rack Manual

Chapter 7: My.uaudio.com 

143

Coupons

Coupons may be included in UAD retail packages and/or included with email promotions. 
These virtual coupons have dollar values that are as “good as cash” for buying UAD plug-
ins at my.uaudio.com. Coupons are applied to your my.uaudio.com account automatical-
ly. The coupon dollar amount is in your account as a credit, ready to be applied to your 
store purchase.
Coupons expire after a limited time period, and they can be used only once.

Tip: Coupons are a great reason to subscribe to promotional announcements. 
Email subscription preferences are specified on your “My Profile” page at 
my.uaudio.com.

Plug-Ins are already installed

The UAD software installer always installs the complete suite of available UAD plug-ins 
to the hard drive during installation. Therefore when you purchase an optional license, 
you don’t download that individual plug-in. Instead, you download a newer authorization 
file, which activates the plug-in file that is already installed.

Important: 

Older versions of the UAD software may not include all the latest UAD 

plug-ins. To ensure all UAD plug-ins are installed, and for optimum performance, 
we recommend updating to the latest UAD version.

Authorization Overview

All UAD plug-ins must be authorized before they can be used. Authorization is accom-
plished by clicking the 

Authorize Plug-Ins button

 in the UAD Meter & Control Panel, then 

double-clicking the downloaded authorization file.

Video Help

Universal Audio’s website contains helpful videos that explain how to register and autho-
rize the product, obtain optional plug-ins, and more:

• 

www.uaudio.com/videos

Procedure

This section is a detailed overview of the entire UAD authorization system. For the step-
by-step authorization instructions, see 

“Registration & Authorization Procedure” on page 

32.

Without authorization, UAD plug-ins can be enabled to run for 14 days without function-
al limitations in a timed demo mode (see 

“Demo Mode” on page 145

).

Important: 

Your Realtime Rack device must be registered at my.uaudio.com to 

download an authorization file, and you need a my.uaudio.com account to register 
the device.

Summary of Contents for Soundcraft Realtime Rack




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands