manualshive.com logo in svg

Universal Audio Arrow, Manual

Introducing the Universal Audio Arrow - an impeccable audio interface offering outstanding sound quality and flexibility. Unlock its full potential by accessing the comprehensive user manual, available for free download on manualshive.com. Explore every feature and maximize your music production experience with this essential manual.

Share
Download
background image

Arrow Manual

Using UAD Plug-Ins 

219

DSP Loading Notes

•  UAD devices feature either one, two, four, or eight (SOLO, DUO, QUAD, or OCTO) 

on-board DSP cores for UAD plug-in processing. Arrow features UAD-2 SOLO core 
processing.

•  UAD DSP use is proportional to the sample rate. Twice as many UAD plug-ins can 

be used at a 48 kHz sample rate versus a 96 kHz sample rate, and so forth. 

•  UAD plug-ins within Console can only run on Arrow’s built-in DSP. If a UAD-2 DSP 

accelerator is added to the system (such as UAD-2 Satellite), the additional DSP 
can be used for UAD plug-ins within a DAW, but not for Realtime UAD Processing 
within Console. 

•  Bypassing individual components within some UAD plug-ins can conserve UAD 

resources. For example, bypassing the compressor in the Precision Channel 
Strip when only the EQ is in use, and/or bypassing any of the unused bands of 
the Precision Channel Strip EQ will use less UAD DSP (unless DSP LoadLock is 
enabled).

•  The 

UAD Instance Chart

 at 

help.uaudio.com

 lists the amount of DSP used by each 

UAD plug-in. The chart can help determine which UAD plug-ins to use within 
available UAD resources. 

•  Specific UAD plug-ins have the ability to conserve UAD resources when individual 

features within the plug-in are inactive. These plug-ins are marked with an 
asterisk (*) in the 

UAD Instance Chart

 at 

help.uaudio.com

. Note that 

DSP 

LoadLock

 must disabled to take advantage of this feature.

•  Arrow uses UAD DSP and memory for its internal digital mixer and Input Delay 

Compensation engine. Therefore, the UAD Meter gauges will indicate loads (when 
UAD hardware is connected) even if UAD plug-ins are not inserted in Console or 
the DAW. 

•  The host computer system memory and CPU are never used for UAD plug-in 

processing within a DAW. However, there will be a small additional load on 
the host CPU induced by data transfers and user interface operations. This is 
unavoidable when using any DSP device.

•  When 

LiveTrack Mode

 is active, host CPU load is increased.

•  Within a DAW, UAD plug-ins can run at the same time as native (host CPU based) 

plug-ins, and in any combination. However, native plug-ins cannot be loaded 
within Console. 

Summary of Contents for Arrow

















































































































































































































































































Reviews:

No comments

Related manuals for Arrow

Raymarine ST7000 Installation Instructions Manual preview
ST7000
Brand: Raymarine Pages: 55
Halyard MIC Series Instructions For Use preview
MIC Series
Brand: Halyard Pages: 4
GAME Underwater Light Show & Fountain Instructions preview
Underwater Light Show & Fountain
Brand: GAME Pages: 2
GE b30 User'S Reference Manual preview
b30
Brand: GE Pages: 242
GE ATS1290 Instruction Manual preview
ATS1290
Brand: GE Pages: 24
Balanced Body Allegro How To Assemble preview
Allegro
Brand: Balanced Body Pages: 3
CAB 4712 Operator'S Manual preview
4712
Brand: CAB Pages: 13
CAB 4712 Assembly Instructions Manual preview
4712
Brand: CAB Pages: 30
CAB 5314 Operator'S Manual preview
5314
Brand: CAB Pages: 17
CAB 3014 Service Manual preview
3014
Brand: CAB Pages: 33
C. Crane Camping Equipment Instruction Manual preview
Camping Equipment
Brand: C. Crane Pages: 8
C-Pro Direct ADM Fittings Manual preview
ADM
Brand: C-Pro Direct Pages: 4
C-Pro Direct ADM Instructions For Use preview
ADM
Brand: C-Pro Direct Pages: 4
Laserworld EL-60 G Manual preview
EL-60 G
Brand: Laserworld Pages: 8
Laserworld EL 200 LED User Manual preview
EL 200 LED
Brand: Laserworld Pages: 6
LaserLiner ActivePen Manual preview
ActivePen
Brand: LaserLiner Pages: 56
LaserLiner AC-tiveMaster Operating Instructions Manual preview
AC-tiveMaster
Brand: LaserLiner Pages: 54
Raymarine ST70 Instrument Quick Reference Manual preview
ST70 Instrument
Brand: Raymarine Pages: 12

Brands by name

Popular brands

Load more brands