manualshive.com logo in svg

Universal Audio Arrow, Manual

Share
Download
Universal Audio Arrow Manual Download Page 124

Arrow Manual

Console Reference 

124

Cue Outputs Popover

Note: For an overview of Arrow’s HP cue mix bus, see 

HP Cue Overview

.

The Cue Outputs popover window is where the source signal (either the main monitor mix 
or the HP cue mix) for Arrow’s front panel headphone jack is selected. To access the Cue 
Outputs Popover, click the CUE OUTPUTS button in the Monitor Column. 
When Arrow is connected with a Universal Audio Apollo audio interface(s), additional 
cue sources and destinations are available as a matrix within the Cue Outputs popover, 
reflecting the additional available cue mix buses and hardware outputs with an expanded 
I/O system.

Cue Outputs popover

Cue Source Select

The HP and MIX switches select the signal source bus for the headphone output on 
Arrow’s front panel. The bus source name is on the switch. The source for the headphone 
output is active when its switch is lit.
The headphone output source can be either the HP cue mix bus or the main monitor mix 
bus. Both bus sources cannot be routed to the headphone output at the same time (the 
HP cue source is mutually exclusive).

Note: To allow selection of HP for the monitor outputs (via the control room 

Monitor Source Select

 switches), the HP source must not be set to MIX. 

MIX
When set to MIX (the default), the headphone output signal is Console’s main monitor 
mix, summed with all DAW outputs that are routed to the monitor outs (if applicable). 
Console’s main monitor mix faders, mutes and solos are reflected in the headphone 
output in this mode.

Close

HP Output

Mono

Headphone Output 

Source

Summary of Contents for Arrow

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands