Universal Audio Arrow Manual Download Page 267

Page: 267 / 272

Arrow Manual

Notices

267

Notices

Warranty

Universal Audio provides a limited warranty on all hardware products. To learn more,
please visit

help.uaudio.com

. The limited warranty gives you specific legal rights. You

may also have other rights which vary by state or country.

Repair Service

If you are having trouble with Arrow, first check all system setups, connections, software
installations, operating instructions, and the

Troubleshooting

chart. If that doesn’t help,

contact our technical support team. To contact technical support or learn more about
repair service, please visit

help.uaudio.com

Maintenance

• Arrow does not contain a fuse or any other user-replaceable parts. The unit is

internally calibrated at the factory. No internal user adjustments are available.

• Any modifications to the unit, unless expressly approved by Universal Audio, could

void the User’s authority to operate the equipment.

Summary of Contents for Arrow

















































































































































































































































































Search results

Summary of Contents for Arrow

Reviews:

Related manuals for Arrow

Brands by name

Popular brands

Universal Audio Arrow, Manual

Search results

Summary of Contents for Arrow

Reviews:

Related manuals for Arrow

Brands by name

Popular brands