manualshive.com logo in svg

Universal Audio Arrow, Manual

Share
Download
Universal Audio Arrow Manual Download Page 216

Arrow Manual

Using UAD Plug-Ins 

216

LiveTrack Mode

LiveTrack mode reduces latency on an active UAD plug-in to the lowest possible amount 
when the UAD plug-in is used within a DAW. This feature is useful for monitoring UAD-
processed audio when recording live performances via software monitoring in the DAW.

Note: LiveTrack is not available for UAD plug-ins used within Console, where 
Realtime UAD Processing always minimizes latency.

Reduced latency with LiveTrack is accomplished by circumventing standard I/O buffering 
processes. In LiveTrack mode, UAD signal data is transferred and processed immediately 
instead of being buffered.

Note: LiveTrack mode is unavailable on all UAD-2 devices whenever any UAD-2 
FireWire device is connected to the system.

Increased Host Loading

When LiveTrack is active, host CPU loading increases. The host load is directly 
proportional to the DSP load of the UAD plug-in(s) in LiveTrack mode. However, host 
CPU is never used for UAD plug-in processing with LiveTrack.

Extra Latency with LiveTrack

When 

Extra Buffering

 is enabled or when 

Upsampled UAD Plug-Ins

 are used with 

LiveTrack, latency is increased. Extra Buffering adds 64 samples, and each plug-in with 
additional latency using LiveTrack adds the value from the chart in the UAD Plug-Ins 
Manual.

Note: For more detailed information about latency and buffers, see 

Latency & 

Delay Compensation

LiveTrack Activation

To activate LiveTrack Mode, click the microphone icon switch in the UAD Toolbar. 
LiveTrack Mode is active when the mic icon is red.
LiveTrack Mode can be activated simultaneously on multiple UAD plug-ins. However, 
host system CPU loads will increase with each LiveTrack Mode instance.

LiveTrack switch as it appears when active

Summary of Contents for Arrow

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands